Helicóptero Sikorsky HRS-3 Beta, (SAS~Sani & Flakiten).

Comentarios y anuncios de los mods que van publicándose en diferentes sitios. Instalación, recomendaciones, configuraciones...
Responder
Avatar de Usuario
ton414
Mensajes: 927
Registrado: 31 Ene 2010, 16:06

Helicóptero Sikorsky HRS-3 Beta, (SAS~Sani & Flakiten).

Mensaje por ton414 »

Acaba de salir la versión beta del helicóptero Sikorsky HRS-3

Imagen

Enlace a la página de SAS:
http://www.sas1946.com/main/index.php/topic,7862.0.html
This is a helicopter MOD for IL2 Strumovik (c).
SAS~Sani has managed to make a flight model that is very close to real. No total flight characteristics of a helicopter, I know. But considering the limitations of the simulator is the best helicopter flight model I've tried. I am a helicopter pilot so I know something about it.
Notes:
1). The Sikorsky HRS-3 MOD has an auto stability system that makes you the helicopter flight more easy.
2). The real Sikorsky S-55 has a clutch between the engine and the rotor gear box. The pilot could engage and disengage the rotors. We don´t have this function on il2 so I put an Clutch system that disengages the rotors if your trotthle is bellow the 10%.
3). The floats are for emergency water landings. They´ll fired ussing the "arrestor hook" key and can be fired only one time.
4). The "cabin door" key only opens the main cargo door.
5). You have 3 view positions. Normal in the rigth side or the cabin, head out using "toggle seat position" key and co-pilot view using "toggle gunsight" key.
6). Autorrotarion flight has been achieved but not the flare manouver. I don´t know if "flare manouver" is the correct term in engish, I´m talking about the manouver to reduce speed and stop descent near the ground. So you may do a small landing run.
7). If you got a full cabin/ammo load you must reduce the fuel load. The sikorsky S-55 was a power limited helicopter (radial engine).
8). AI has not yet learned how to fly helicopters.
9). If you use Quick Mission, try to start the flight on the ground/runway.

INSTALATION:
1). Open the Sikorsky_HRS3_v1.0.rar file
2). Put the Sikorsky_HRS3_v1.0 folder on your MODS folder
3). If you don´t have DiffFM MOD installed, put DiffFM folder on your MODS folder
4). Open your air.ini file and paste the next entry:

HRS3 air.HRS3 1 NOINFO usa01 DESERT

5). Enjoy it
Descargas directas:

DOWNLOAD MOD:
http://www.mediafire.com/?we3umdufq64quna

DOWNLOAD SKIN TEMPLATE:
http://www.mediafire.com/?qlmbh1f0dy6w8q8

DOWNLOAD SKINS: (you may create the HRS3 skin folder)
http://www.mediafire.com/?8fz69gxc12ao4cd
Última edición por ton414 el 14 Ene 2011, 02:12, editado 1 vez en total.
Imagen
Avatar de Usuario
PA_Willy
Líder-Piloto
Líder-Piloto
Mensajes: 12150
Registrado: 24 Nov 2008, 17:51

Re: Helicóptero Sikorsky HRS-3 Beta, (SAS~Sani & Flakiten).

Mensaje por PA_Willy »

Gracias!!
Imagen
Avatar de Usuario
PA_Yomesmo
Líder-Piloto
Líder-Piloto
Mensajes: 3290
Registrado: 26 Nov 2008, 02:10
Ubicación: Donde Internet YA llega... :D

Re: Helicóptero Sikorsky HRS-3 Beta, (SAS~Sani & Flakiten).

Mensaje por PA_Yomesmo »

Muchas gracias por el aporte, ton414. :-bd
Imagen
"Sólo los que vuelan saben por qué los pájaros cantan"
Avatar de Usuario
Peak
Mensajes: 884
Registrado: 08 Dic 2008, 13:33

Re: Helicóptero Sikorsky HRS-3 Beta, (SAS~Sani & Flakiten).

Mensaje por Peak »

Probanding.

Imagen
Imagen Imagen
Responder

Volver a “MODS para IL-2 Sturmovik 1946”