Es un Work In Prgress de JAMF. Pero tiene muy buena pinta. Seguiremos la pista al proyecto y seguiremos informando.
Things to do:
-Rotate Manifold dial a bit, so it aligns with previous gauge.
-Find or make a 0-100 Ampere gauge.
-Find a good picture of the Hydraulic Pump Pressure indicator.
-Source a good RPM indicator, a photo or scan.
-Replace the gear lights.
-Replace the gyro, gyro compass and turn/bank indicator.
-Cover the gunsight housing "A" with a photo of the surface of the N3-C in my small collection.
-Decide on whether to remove the "reserve" from the tank dials and replace the "FRONT/REAR" text with "MAIN/RESERVE".
.