Ju-87B-2. Actualización 3D de Barnesy12 (y Jero)

Comentarios y anuncios de los mods que van publicándose en diferentes sitios. Instalación, recomendaciones, configuraciones...
Responder
Avatar de Usuario
PA_Willy
Líder-Piloto
Líder-Piloto
Mensajes: 12150
Registrado: 24 Nov 2008, 17:51

Ju-87B-2. Actualización 3D de Barnesy12 (y Jero)

Mensaje por PA_Willy »

http://freeil2modding.free-forum.net/vp ... tml#p33978
this mod adds new Pilots and 3D Fixes to the ju87B type aircraft in your IL2 game
the pilots are high poly made up of multiple meshes to stay with in the poly limits of the game this allows for more detail and smoother game play with out as much load on the players system
included in this mod are the following fixes as well
new pilots front & rear dressed in early luftwaffe pilot gear with siemens type head phones, coveralls ,new 02 mask etc individual faces for the pilots also **
the pilots also have animated eyes courtesy of Ranwers
there are two types of coverall textures which can be found in the textures folder
new cockpit third person view new parts, radios ,new MG15, armour plate, etc
new cowling with smoothed or remade parts i have used jeros excellent remake of the chin intake also
new props rotol and damage prop also
new high poly multi mesh wheels main and tail * note these are imported from another plane found freely on the net
new exhaust stacks & cut outs
round wing guns etc
new bomb rack * if using gerds bomb release mod edit out the BR line found at the bottom of the heir file with // in front of the entry
you will have to add the lines for gerd parts arm1 etc from gerds mod to the hier file in this mod
new spats reworked from jeros to accommodate the new wheels
many tiny changes like thinner radio wire etc stubbs on spatts rounded out etc
there is a psd and uv map for the new props included if you whish to adjust more skins
i have included fifty seven skins found at M4T with the adjusted props to start you off.
the skins remain the property of the respected authors and in no way do i claim any ownership of said skins If you would either like your names added to the credits or skins removed please contact me asap @il2FreeModding
i have mapped the props this way because previous prop mods while they accommodate the standard skin loose the nice clean lines between colors bands etc these props do not! the standard skin will fit as usaul unlike some other so called improvements
all in all there are approx. eighty plus improvements, changes to this aircraft
Install place the #JU87-B2 folder in your mods folder the skins into your paint schemes skins folder
Cuando lo instale haré algunas capturas.
Imagen
Avatar de Usuario
Jeronimo
Mensajes: 2773
Registrado: 23 Ene 2010, 19:28

Re: Ju-87B-2. Actualización 3D de Barnesy12 (y Jero)

Mensaje por Jeronimo »

Si no quieres modificar todos tus skins del Stuka dimelo y te mandare una modificación que hice de los bujes adaptando el modelo 3D de Barnesy a las texturas originales, se la envie hace unos días pero se ve que o se le ha olvidado o le ha vuelto a dar el cabreo. :-??

Asi es como me queda a mi eliminando toda la morralla que sobra y con mis ruedas.


Imagen



Un saludo.
Imagen
Velocidad, altitud o cabeza: por lo menos dos son siempre necesarios para terminar con éxito el vuelo.
Avatar de Usuario
ton414
Mensajes: 927
Registrado: 31 Ene 2010, 16:06

Re: Ju-87B-2. Actualización 3D de Barnesy12 (y Jero)

Mensaje por ton414 »

Pongo una captura mía, que me ha quedao mu bonica. :D

Imagen
PA_Jeronimo escribió:... o le ha vuelto a dar el cabreo. :-??
¿A quién le ha dado el cabreo?, que ...

Imagen =))
Imagen
Avatar de Usuario
PA_Willy
Líder-Piloto
Líder-Piloto
Mensajes: 12150
Registrado: 24 Nov 2008, 17:51

Re: Ju-87B-2. Actualización 3D de Barnesy12 (y Jero)

Mensaje por PA_Willy »

PA_Jeronimo escribió:Asi es como me queda a mi eliminando toda la morralla que sobra y con mis ruedas.
Pues estoy interesadísimo... ¿MP?

Y gracias a Barnesy12 y a tí, Jero.
Imagen
Avatar de Usuario
PA_Keko
Piloto-Punto
Piloto-Punto
Mensajes: 1962
Registrado: 06 Ene 2014, 01:11
Ubicación: Vantaa Finlandia

Re: Ju-87B-2. Actualización 3D de Barnesy12 (y Jero)

Mensaje por PA_Keko »

:ymapplause: :ymapplause: exelente , ademas me he fijado en el detalle del piloto que cierra los ojos! , realmente muy bueno y ni comparado a los pilotos default que traia el juego! muy buen aporte!!!

salut!!!! :-bd
Imagen

"Þat mælti mín móðir,
at mér skyldi kaupa
fley ok fagrar árar,
fara á brott með víkingum,
standa upp í stafni,
stýra dýrum knerri,
halda svá til hafnar,
höggva mann ok annan. "
Avatar de Usuario
PA_Willy
Líder-Piloto
Líder-Piloto
Mensajes: 12150
Registrado: 24 Nov 2008, 17:51

Re: Ju-87B-2. Actualización 3D de Barnesy12 (y Jero)

Mensaje por PA_Willy »

Algunas capturas de este renovado Stuka (ojalá se hiciera lo mismo para todos los modelos obsoletos que quedan en el simulador):

Imagen

Imagen

Imagen
Imagen
Avatar de Usuario
Jeronimo
Mensajes: 2773
Registrado: 23 Ene 2010, 19:28

Re: Ju-87B-2. Actualización 3D de Barnesy12 (y Jero)

Mensaje por Jeronimo »

Sip, pero eso supone horas y horas y horas de trabajo x_x y luego igual en la 4.13 te cambian algún archivo y ya la hemos liao. :-w
Imagen
Velocidad, altitud o cabeza: por lo menos dos son siempre necesarios para terminar con éxito el vuelo.
Avatar de Usuario
PA_Willy
Líder-Piloto
Líder-Piloto
Mensajes: 12150
Registrado: 24 Nov 2008, 17:51

Re: Ju-87B-2. Actualización 3D de Barnesy12 (y Jero)

Mensaje por PA_Willy »

Posteé esas capturas en SAS para que todo el mundo pudiera ver el nuevo modelo, pero esos capullos arrogantes las han borrado sin más explicación ni aviso, ni siquiera por MP. Creo que ya sabemos por qué...
Imagen
Avatar de Usuario
ton414
Mensajes: 927
Registrado: 31 Ene 2010, 16:06

Re: Ju-87B-2. Actualización 3D de Barnesy12 (y Jero)

Mensaje por ton414 »

PA_Willy escribió:Posteé esas capturas en SAS para que todo el mundo pudiera ver el nuevo modelo, pero esos capullos arrogantes las han borrado sin más explicación ni aviso, ni siquiera por MP. Creo que ya sabemos por qué...
Pues sí, afortunadamente creo que la gente ya los va conociendo un poco mejor.
Si al menos nos dejasen trabajar en paz al resto de la comunidad, eso estaría bien, aunque por desgracia creo que eso no va a pasar.
Imagen
Responder

Volver a “MODS para IL-2 Sturmovik 1946”